ELV - Division Capabilities Our ELV Solutions department undertakes the most complex low voltage and telecommunication systems in the industry to bring a better quality of living , communication and technology to the end users. Under a building management system supplied by a third party; we are delighted to bring the best of global technologies to our customer’s table to be able to optimize their use of time. With a very demanding time schedule we understand that people have to take advantage and utilize technology to optimize their use of time during the day. Our systems help people on a daily basis to achieve that. From Hospitals, to atriums, religious institutions, stadiums, classrooms, homes, commercial and residential buildings; our solutions are fit for use right across the board. It is Telectron’s responsibility to ensure the right solution is used for the right application and undertakes the responsibility to ensure that the systems work properly.
MOST IMPORTANTLY; WE ARE COMMITTED TO DELIVER !!
Video acquisition and aggregation for network operators.
The merging of TV and internet as well as the rapidly changing consumer habits when using linear and non-linear TV have an impact on the requirements for modern headend technology. At the same time, the fast technological progress in the development of fixed and mobile end devices is a considerable challenge to telecommunication companies, cable network operators and city carriers where the introduction of new services is concerned. Sustainable headend systems are the means to reinforce and further expand one's market position in this extremely dynamic environment. At the same time, these systems have to fulfil particular requirements. Among them are a space-saving, compact installation, user-friendliness, and increasingly, the aspect of energy efficiency.
WISI offers two headend systems of varying capacity which meet these requirements to the highest degree. Tangram is a high-density platform designed for cost-effective and energy-efficient signal acquisition as well as "Edge" applications. The system offers all necessary functions in extremely high density for the operation in professional networks. With the software based headend system Chameleon WISI takes another approach. Its modules are programmed and configured via software. The underlying concept offers the user extreme flexibility with the conversion of input signals into all current output signals required the network. At the same time the headend can be updated any time via software in the shortest possible time, with just a keystroke. The Society of Cable Telecommunications Engineers (SCTE) has awarded this innovative headend concept with the prestigious SCTE Award 2013 for Technical Innovation in the category "Best digital processing solution".
Product used for this Solution :
The high performance headend for gateway and EDGE applications.
The award-winning headend: software-based video processing.
You might also be interested in..
Optical transport platform for HFC and Fiber-to-the-X
Cost-effective headend for small and medium size networks.
Multimedia server to provide additional services to TV networks.
Chameleon is a modular headend system that requires only one single type of module. The integrated components can adapt their function depending on requirements. They are designed for all current and future applications and they are ideally suited for the transition from the analogue to the digital world as well as the connection between HFC- and IP distribution platforms.
Universal Headend for any application:
The headend system Chameleon provides the user with universal applications. The Chameleon modules are fully flexible configurable via software. This concept is unprecedented in the international market. It provides the user with absolute asset protection. Among the Chameleon software components are: DVB receivers for different signal paths, transmodulators, Edge QAM, MPEG-4 decoder, IP and ASI streamer and remultiplexer.
Solutions with the Chameleon:
RF Overlay: Solutions for video services in GPON and Active Ethernet networks.
The days of good old linear TV are far from being numbered. On the contrary, over the last years TV viewing time in private households has even further increased from an already high level. However, the way how and especially where viewers use their TV is changing. In the course of Video-On-Demand, MultiScreen, SmartTV, and HbbTV viewing habits and needs change from generation to generation. As a rule TV becomes more interactive and mobile the younger the viewer is. At the same time there is a trend towards HD technology. As a consequence, bandwidth requirements are rapidly increasing. Telecommunications service providers and city carriers have to take this development into account when expanding their existing network infrastructure.
Economically efficient expansion strategies are needed. For mere distribution services - such as TV - a point-to-multiple-point solution like RF Overlay is advisable. All analogue and digital TV channels are transmitted to the customer via an additional wavelength (1550nm) or through a dedicated fiber. With its high-capacity optical platform Optopus, WISI offers system operators a technically mature solution for the realization of optical TV distribution in FTTx networks. The platform includes a wide range of 1550 nm transmitters as well as powerful EDFAs whose capacity vary with the dimension and topology of the respective network thereby providing system operators with an ideal solution which is equally efficient and sustainable.
Everything you need for your cable network:
From the headend to the wall-outlet: everything for the cable network.
The HFC networks of network providers and city carriers are anymore solely designed to the broadcasting of analogue and digital TV programs. In the last few years communication services such as broad band internet access, video-on-demand and telephony have been added. Beyond that, customers want more and more to use higher definition contents on their mobile end devices, which have to be provided by the network operator. These new interactive TV and data services in particular increase the requirements for flexibility and bandwidth in the backbone as well as the access network.
Wisi has the ideal answer to how to meet the bandwidth requirements of providers which have developed their network with HFC technology in combination with DOCSIS cable systems are in demand; it is WISI's optical high-density platform Optopus for HFC networks. This includes, amongst other things, a portfolio of optical transmitters and amplifiers as well as return path receivers for any HFC application. The use of O-band WDM technology with corresponding WISI components for example minimizes the HFC cluster and maximizes the bandwidth for connected customers extremely cost-efficient without using additional glass fiber.
Automatic Barrier Automatic barrier system with aluminium barrier section up to 3.20 m, supplied in kit ready for installation.
Kit consisting of: two 1.60m modular arms with bult-in brackets, safety switch trim with covers, support, anchoring arm, 12V D.C. electromechanical motor, control unit powered by 230V A.C. 50-60Hz with built-in two-channel receiver, flashing light with aerial, pair of photocells, support column, two 433MHz two-channel radio controls. For battery supply use optional battery type ZBA1.
Day & Night cameras for daytime colour vision and night-time vision with DSP image control processor. Equipped with Sony Super HDD sensor and 4mm to 9mm Varifocal lens with LED illuminators for operation from 25 to 50 metres. The range also includes a Varifocal camera with On Screen Display to program camera functions, including: privacy, motion detection, mirror, back light, contrast and sharpness control, Digital Noise Reduction, Sens-up. Aluminium housing and sunshade, IR antiglare window.
Noise Reduction, Sens-up. Aluminium housing and sunshade, IR antiglare window
Grundig is a world-class German manufacturer and long-established consumer electronics brand, with a reputation for high quality and superb reliability.
Grundig Security advanced Video surveillance systems for professional applications,high-quality, exceptional functionality and simple operation with Innovative technologies, excellent design, high quality and ease of use.
Grundig has embraced the new technology and incorporated it into an extensive CCTV surveillance camera range.
The camera range includes PTZ and anti-vandal domes, bullet for internal and external applications, with traditional box and specialist, compact casing designs also available.
Each camera has impressive functionality, meeting every current surveillance requirement which offers advanced specifications, making effective use of the latest technologies. These include high resolutions providing clear images for detailed identification and evidential purposes a variety of exposure methods and encrypted recording directly onto a SD card. Intelligent features include privacy zones for non-invasive surveillance and legal compliance intelligent alerts to operators and system management tools using motion detection and other alarm triggers.
The Professional range provides a high resolution, greater processing power and increased storage.
Each NVR will drive up to independent monitors which are configured within a system and connected using the HDMI, VGA or BNC ports. A "Digital Spot Monitor" feature allows users to display the video from all the system cameras, using just the bandwidth equivalent of a single, Full HD channel. The NVRs support Grundig, ONVIF, PSIA and many other protocols, making system upgrades quick and simple.
Intelligent event and alarm management features provide rapid search functionality, automatically triggering a series of agreed actions.
Remote access for viewing and managing the NVRs is enabled using an intuitive SCMS App and SCMS PC application.
GRUNDIG VIDEO MANAGEMENT SYSTEM (VMS) – SCALABILITY AND INTELLIGENCE.
INNOVATIVE AND INTUITIVE.
The Grundig VMS provides reliable protection of people, places and assets.
Using flexible ICT infrastructures, it seamlessly integrates video security with access control, alarm management and professional communications systems to meet the needs of any site, anywhere. Built-in system intelligence increases operator efficiency and effectiveness, whilst saving costs.
Intelligent content analysis within the Grundig VMS includes motion, scene, vehicle and face recognition, which can be applied to live video and playback.
Reliability and efficiency are core to Grundig VMS. Innovative and intelligent features include system-wide event handling with customizable scripts; system scalability; third party integrations and highly configurable, user rights.
We are always on hand with competent service.
German video security excellence - by GRUNDIG
The fire alarm system shall comply with requirements of NFPA Standard 72 for Protected Premises Signaling Systems except as modified and supplemented by this specification. The system shall be electrically supervised and monitor the integrity of all conductors.
the specification includes the furnishing, installation, and connection of a microprocessor controlled, analog addressable, intelligent fire alarm equipment required to form a complete coordinated system ready for operation. It shall include, but not be limited to, alarm initiating devices, alarm notification appliances, control panels, auxiliary control devices, annunciators, power supplies, and wiring as shown on the drawings and specified herein
The system shall be an active/interrogative type system where each transponder and/or addressable device is repetitively scanned, causing a signal to be transmitted to the main fire alarm control panel (FACP) indicating that the device and its associated circuit wiring is functional. Loss of this signal at the main FACP shall result in a trouble indication as specified hereinafter for the particular input.
The facility shall have an emergency voice alarm communication system. The digitized recorded voice message shall notify occupants that a fire condition has been reported. The message shall instruct the occupants with emergency instructions. Emergency manual voice override shall be provided.
A new intelligent reporting, microprocessor controlled fire detection system shall be installed in accordance with the specifications and drawings.
Simple, easy and intuitive, the Vimar By-me home automation system is designed to be compatible with every kind of home and lifestyle, helping to make our daily lives easier and more comfortable.
By-me is an easy-to-program Bus system for the coordinated management of all functions traditionally controlled using standard devices such as switches, dimmers, timers and video door entry systems. These devices are unable to interact and therefore cannot be programmed or managed from a single supervision point. With By-me however, the household electrical installation is integrated into a centralized system, allowing for extremely effective regulation and control.
By-me is compatible with Konnex networks to guarantee interoperability with the thousands of products made by companies associated with Konnex, one of the international standards for home and building automation. Simply by pressing a button, the user can select one of 32 different temperature, lighting and comfort scenes, configured according to daily needs. This reliable and automatic system even communicates via mobile phone when the user is away from home. The system monitors the status of home appliances, promptly reporting alarms. In the event of overload, it cuts power to appliances according to a pre-programmed sequence, thus preventing the inconvenience of blackouts which require power to be switched back on manually at the fuse box. Safety and security, comfort, energy saving, communication and video door entry are all integrated into a single system which continually adapts to the user's changing demands.
Safety and security
Energy Saving Load control and monitoring is an important power-saving feature of the Vimar By-me home automation system. Basically it monitors power usage around the clock, automatically intervening when the preset values are exceeded in order to prevent the risk of power failure due to overload. In this way, it saves the homeowner the inconvenience of having to reset the main switch at the fuse box, which is often hard to access. The system can therefore be programmed so that, in the event of overload, it automatically disconnects supervised sockets from loads which have been previously identified as non-priority. The additional integration of climate and lighting control functions further enhances the home automation system’s energy-saving credentials. For example, it is possible to set the ambient temperature to maintain a standby (e.g. low consumption) value whenever no-one is at home, or to have the lights switch off automatically when you leave.
Control This is where the By-me home automation system comes into its own compared with conventional lighting and electrical installations. The parameters of the entire system can be programmed and modified at any time. This means that all of the functions installed in the home (burglar alarm, lighting scenes, climate, automations, load control etc.) can be monitored and managed centrally from the control panel, or locally via the touch screen. This centralization of all applications drastically simplifies home automation control and helps to economies on time and resources.
Video door entry unit By incorporating one or more external video call panels into the home automation system, it is possible to make contact with visitors and control access to the home. You can display images of callers, open the electric door/gate lock, turn on entrance lights and make intercom calls, all via the control panel.
Fiber Optic Splice Closures provide protection in aerial, underground, and pedestal applications.
A fiber optic splice closure includes a series of stacked splice trays pivotally secured within a housing, and oval shaped generally flexible transport tubes carrying the exposed optical fibers to the splice trays within the closure. The transport tubes have a differential flexibility to permit bending i a direction generally normal to the major dimension of the tube while preventing bending in a direction generally normal to the minor dimension of the tube. Accordingly, optical fiber ribbons carried by the transport tubes are protected from bending in a direction normal to their minor dimension. The splice trays are pivotally secured at one end to a bracket secured to an end cap of the housing. A hinge for each splice tray includes detents to hold an individual tray in a raised position to thereby facilitate access to an underlying tray. In addition, splice holders are provided on each splice tray and include a series of generally flexible walls extending outwardly from a base. The flexible walls further include hollow cavities to more readily accommodate splices of different sizes. A generally rigid shell with a predetermined pattern of openings therein is positioned to overlie the base carrying the flexible walls.
TAB 7, a new release from Elvox, Italy, comes to close the gap between the hype and readiness of the IP technology.
The all-new TAB 7 features WiFi Connectivity over the Cloud allowing a direct communication and full remote control via smart phone application available on iOS and Android.
The all new TAB 7 operates on both IP & 2-wire technology that can adapt to the infrastructure and nature of any project.
All the above are served with the renowned elegance and detail-attentive Italian design.
Please Click here to play a short video on TAB 7:
Specializing in ELV solutions, the IS division promotes some of the world-renowned names in Fire and Safety, CCTV, IPTV/SMATV, Video/Audio Door Entry, Automatic Gates, Home Automation, Guest Room Management, Wiring Accessories, Nurse Call, and other ELV Systems.
The division employs factory-trained engineers and technicians, and provides design, implementation and after sale service for the offered systems.
Elvox has emerged, since its inception in 1954, as one of the most successful security systems' manufacturers in the world, specialising in Audio/Video Door Entry Systems, Automatic Gates and CCTV systems. By joining Vimar in 2011, Elvox was able to conclude the development of its 2-WIRE PLUS system for the 7200 series and the Wide Touch monitors featuring 7" hands-free technology; the new types were added to its standard Giotto series with 3.5" TFT LCD monitor. It also launched the totally new TAB series in its contemporary elegant and sleek design which comes with standard handsets and hands-free types with feather touch capacitive controls.; it also features two screen sizes 3.5" & 4.3".
The all new PIXEL Entrance Panel crowns the climax of Elvox continuous innovations with its modern design featuring IK10 rate of harness and versatile finishes (Grey, Black, Anodized Grey & White).
The digital panel is offered with 3.5" colour LCD display, which, with an 80° horizontal viewing angle, ensures excellent reading even in backlit conditions.
Designed to ensure quick, functional installation, Pixel can be maintained from the front, without having to remove the panel. Special hinges support the modules even when they are open, so you can work with your hands free.
Elvox door entry video/audio systems are installed in some of the most prestigious and large projects in the UAE like Al Muneera at Al Raha Beach Development, and Ocean Heights Tower, the world's fifth tallest residential skyscraper in the heart of Dubai Marina.
Elvox products can fully be integrated with Vimar's Home Automation Systems.
The elegant series of wiring accessories Eikon Evo stands out from the crowd. Its precious materials and ultra slim profile makes it immaculate, light, minimalist silhouette that stands just a few millimetres proud of the wall.